Biomasa residual de industria del Cannabis, una alternativa para la obtención de productos de alto valor agregado

A medida que como sociedad vamos dando más importancia a lograr una economía circular, se hace importante encontrar fuentes renovables aptas para la producción de biocombustibles y bioquímicos. En los últimos años, diversas fuentes de biomasa lignocelulósica han sido estudiadas para estos propósitos. Dentro de estas fuentes de biomasa se encuentra el cáñamo (Cannabis sativa L.), siendo parte de una industria que ha crecido a pasos agigantados en las últimas décadas, en Colombia, desde su legalización. Específicamente, la industria del cannabis medicinal es responsable de generar una enorme cantidad de residuos en forma de los tallos de la planta, considerados un subproducto de bajo valor. En esta revisión se compila la información de diferentes estudios sobre el aprovechamiento de la fracción de polisacáridos de biomasa cáñamo, mediante transformaciones químicas y bioquímicas, para la obtención de productos de valor agregado. Se encontró que la mayoría de estudios están enfocados en la obtención de bioetanol o biogás; se encontraron también reportes de otras moléculas como ácido succínico, ácido láctico, furfural, polihidroxialcanoatos y bisaboleno. La viabilidad a nivel industrial de todos estos procesos permanece siendo una incógnita, pues los pasos de pretratamiento, hidrólisis y de conversión final utilizados suelen ser costosos. Es necesario que los estudios que realicen en el futuro se enfoquen en optimizar las condiciones de estos procesos y hacerlos verdes y así asegurar que puedan ser escalados.

As we as a society, give more importance to achieving a circular economy, it becomes important to find renewable sources suitable for the production of biofuels and biochemicals. In the last years, several different sources of lignocellulosic biomass have been studied for these purposes. One of these biomass sources is hemp (Cannabis sativa L), being part of an industry that has grown through giant steps in the last decades, in Colombia, since its legalization. Specifically, the industry of medicinal hemp is responsible for the generation of huge amounts of residues in the form of the plant stalks, considered a low value subproduct. This review compiles the information of several studies about the exploitation of the polysaccharide portion of hemp biomass through chemical and biochemical transformations, obtaining value-added products. It was found that most of these studies focus on the production of bioetanol or biogas; reports of other molecules such as succinic acid, furfural, polyhydroxyalkanoates and bisabolene were also found. Industrial viability of these processes remains a question, since pretreatment, hydrolysis and final conversion steps are usually expensive. It necessary that future studies focus on optimizing conditions of these processes as well as making them green, ensuring that they can be scaled.

Mercury (II) removal from aqueous solutions by iron nanoparticles synthesized from extract of Eucalyptus grandis.

Artisanal mining is the main source of mercury emissions in South America, which generates a serious environmental impact due to this toxic metal, recent research is directed to minimize the impact, therefore this study focuses on the green synthesis of nanoparticles for the absorption of mercury in water. For the synthesis of iron nanoparticles, an extract of Eucalyptus grandis was used with iron chloride salts using water as solvent. The synthesized nanoparticles showed a specific surface area of 131.90 m2/g, determined by Brunauer-Emmett-Teller isotherm (BET). Nanoparticles were characterized by Fourier transformed infrared spectroscopy (FTIR) and transmission electron microscopy (MET). The behavior of nanoparticles synthesized during Hg (II) retention was evaluated measuring pH, temperature, nanoparticle dosing, presence of other ions and comparing with other adsorbents. All analyses measured by atomic absorption spectroscopy by the cold vapor technique (CVAAS), presenting a retention percentage for Hg (II) between 75.05 and 79.59% with pH between 4 and 7. The adsorption isothermal was adjusted to the Freundlich model and the percentage of retention of Hg by the synthesized nanoparticle was 79.26%. This work shows a method for obtaining an environmentally friendly mercury adsorbent from iron and E. grandis with a mercury retention capacity comparable to commercial adsorbents.

Characterization and determination of the quality of rosins and turpentines extracted from Pinus oocarpa and Pinus patula resin.

Rosins and turpentines present in pine resins have been widely used both industrially (coatings, electronics and paint) and pharmaceuticals (ointments). Among the main components of these matrices is abietic acid. This study focuses on the characterization and evaluation of the quality of rosins and turpentines in addition to the quantification of abietic acid in rosins. Rosin and spirit of turpentine were obtained separately through the distillation method from P patula and P. oocarpa resin, species grown in the Department of Cauca-Colombia. Resin-tapping was made using the traditional method (cup and gutter). Quality indicators were determined according to ASTM standards. Solubility tests and identification of functional groups were performed on the obtained rosin by ultraviolet-visible spectroscopy (UV-Vis), infrared (IR) and nuclear magnetic resonance (1H-NMR). The abietic acid present in the rosins was determined by high performance liquid chromatography (HPLC). According to their high acid value and low percentage of unsaponifiable matter, the extracted rosins are considered of medium-high quality. Quantification of abietic acid by HPLC showed 14.85 ± 0.24% and 16.09 ± 0.11% for P. patula and P. oocarpa rosin respectively.

Enzymatic hydrolysis as a tool to improve total digestibility and techno-functional properties of pigeon pea (Cajanus cajan) starch.

Recent studies have indicated that starch from legumes can potentially be used as an alternative to commercial flour with applications in food and biomaterials; however, some modifications may be required first to improve their functionality, as they show relatively lower solubility and functional properties compared to commonly marketed flours (e.g. good water retention capacity). This work used multiple enzymes in flour extracts of pigeon pea (Cajanus cajan), a legume, to optimize the enzyme hydrolysis process of such extracts by the Response Surface Method (RSM), to increase the digestibility and obtain desirable functional attributes at the nutritional level. The pH, temperature, time and enzyme/substrate (E/S) ratio were evaluated, and the degree of hydrolysis (DH) was calculated as well as the reducing sugar content (%RS), used as response variable. According to the experimental design, the best pH, temperature, time and E/S ratio were 6.8, 43 °C, 1.84% m/m and 270 min, respectively. The %RS for the samples under optimal conditions was 3.49 ± 0.02%, and the in vitro digestibility yielded values of 39.2 ± 0.4, 58.6 ± 0.3 and 2.2 ± 0.2 for slowly digestible starch (SDS), rapidly digestible starch (RDS) and resistant starch (RS), respectively. Total digestibility (TD) was 97.8 ± 0.5. The statistical analysis revealed a strong positive relationship for E/S ratio followed by pH: (E/S) ratio, temperature and pH. Enzymatic hydrolysis carried out on pigeon pea showed an increase in TD. Viscosity, water retention capacity (WRC) and solubility were evaluated showing good response for future applications at the industrial level.

EFECTO DEL pH EN LAS TASAS DE BIOACUMULACIÓN DE METALES PESADOS EN LA MACROALGA Bostrychia calliptera (Rhodomelaceae, Ceramiales) / Effect of pH on the bioacumulation rates of heavy metals in macroalgae Bostrychia calliptera (Rhodomelaceae, Ceramiales)

RESUMEN Uno de los factores que más influye en las características químicas de un metal en solución es el nivel de acidez. El pH, por lo tanto, afecta la reactividad del ion y por ende su interacción con los puntos de unión de la pared celular de la planta. Este estudio evaluó el efecto del pH en la capacidad de bioacumulación de metales pesados en el alga roja Bostrychia calliptera (Rhodophyta, Rhodomelaceae). Se sometieron talos del alga a diferentes concentraciones de mercurio (Hg) y Plomo (Pb), desde 0,1 hasta 10 mg/L para Hg y desde 0,1 hasta 15 mg/L para Pb, durante periodos exposición de 0, 12, 24 y 96 horas, bajo diferentes niveles de pH. Las concentraciones de metal acumulado se determinaron por espectrofotometría de absorción atómica. Las mayores tasas de acumulación se encontraron en el alga expuesta a pH 8 (tanto para Hg como para Pb), el cual es un nivel de pH muy cercano al medido en el área de muestreo. La concentración de metal en el alga se incrementó de manera lineal hasta las 48 h de exposición, tiempo en el que se evidenció una mayor eficiencia de acumulación durante el primer intervalo del periodo del bioensayo. El presente estudio permitió identificar el uso potencial del alga B. calliptera como especie bioindicadora de metales pesados en ambientes estuarinos.

ABSTRACT One of the factors with a bigger influence on the chemical characteristics of metal in solution is the level of acidity. Solution pH affects the cell wall metal-binding sites and the metal ion chemistry in water. This study evaluated the effect of pH on the bioaccumulation capacity in the red algae B. calliptera (Rhodophyta, Rhodomelaceae) exposed to different pH ranges. Algae thalli were subjected to different concentrations ofmercury (Hg) and Lead (Pb), at concentrations from 0.1 to 10 mg/L for Hg and from 0.1 to 15 mg/L for Pb, respectively, during the following exposure times: 0, 12, 24 and 96 hours for each ion. Metal concentrations were determined by atomic absorption spectrophotometry according to standard APHA methods. The highest accumulation rates were found when the algae were exposed to pH 8 (for both Hg and Pb), which is a level very close to that measured in the study area. The metal concentration in the algae increased linearly until 48 hrs, a time where a greater accumulation efficiency was evident. The present study allowed to identify the potential use of the alga B. calliptera as a bioindicator species for heavy metals in estuarine environments.

Lipasas en síntesis de polímeros: avances y contribución a la química verde de polímeros / Lipases in polymer synthesis: advantages and its contribution to green polymer chemistry

RESUMEN Las lipasas han sido usadas en las últimas décadas como catalizadores eficientes en la síntesis enzimática de polímeros y gracias a características como alta selectividad, reciclabilidad, inocuidad y fácil separación/purificación se han convertido en una herramienta importante en el campo de los polímeros. En este trabajo se recopilan los desarrollos más importantes en el área y a su vez se muestra la tendencia actual de este campo de investigación.

ABSTRACT Lipases have been used in last decades as efficient catalysts in enzimatic polymer chemistry, thanks to its high selectivity, recyclabil-ity, safety and easy recovery/ separation, lipases have become in an important tool in polymer field. In this paper we compile the most important achievements in the enzimatic polymer chemistry and, at the same, time we show the current trend in this field of research.

Hallazgo de patrones para péptidos-vacuna con capacidad de acople universal en moléculas de HLA-II / Identification of patterns for peptide-vaccines in universal capacity coupling HLA-II molecules / Identificagáo de padroes para peptídeos-vacina com capacidade de acoplamento universal em moléculas HLA-II

Partiendo del alineamiento múltiple de secuencias proteicas humanas obtenidas de las bases de datos del National Center of Biotechnology Information (NCBI) y su posterior análisis espacial tridimensional, se estableció la existencia de un patrón de acople universal para péptidos presentados por las moléculas de histocompatibilidad HLA-II (DR, DP y DQ), siendo una base para el diseño de vacunas proteicas. Estos patrones espaciales fueron claramente exhibidos por los residuos altamente conservados de los tres tipos de moléculas de HLA-II. La aplicación de este nuevo hallazgo permitió diseñar péptidos con mejores valores de acople péptido-HLA-II, que los generados por el péptido de acople universal conocido como CLIP (class Il-associated invariant chain peptide).

Starting from the multiple alignment of human protein sequences obtained from the NCBI database (National Center of Biotechnology Information) and subsequent three-dimensional spatial analysis, the existence of a pattern of universal coupling to peptides presented by MHC molecules HLA-II (DR, DP and DQ) was established, being a basis for the design of protein vaccines. These spatial patterns were clearly exhibited by highly conserved residues of the three kinds of HLA-II molecules. The application of this new finding made it possible to design peptides with better Peptide -HLA-II coupling values than those generated by the universal coupling peptide called CLIP (class II-associated invariant chain peptide).

FA partir do alinhamento múltiplo de sequéncias de proteínas humanas obtidas a partir das bases de dados do NCBI (National Center of Biotechnology Information) e análise espacial tridimensional subsequente, estabeleceu-se a existéncia de um padráo de acoplamento universal para peptídeos apresentados pelas moléculas de histocompatibilidade HLA-II (DR, DP e DQ), sendo uma base para o desenho de vacinas proteicas. Estes padroes espaciais foram claramente exibidos pelos residuos altamente conservados dos trés tipos de moléculas de HLA-II. A aplicagáo deste novo achado permitiu desenhar peptídeos com melhores valores de acoplamento peptídeo-HLA-II, do que aqueles gerados pelo peptídeo de acoplamento universal conhecido como CLIP (classe II-peptídeo associado a cadeia invariante).

Hallazgo de patrones para péptidos-vacuna con capacidad de acople universal en moléculas de HLA-II / Identification of patterns for peptide-vaccines in universal capacity coupling HLA-II molecules / Identificagáo de padroes para peptídeos-vacina com capacidade de acoplamento universal em moléculas HLA-II

Partiendo del alineamiento múltiple de secuencias proteicas humanas obtenidas de las bases de datos del National Center of Biotechnology Information (NCBI) y su posterior análisis espacial tridimensional, se estableció la existencia de un patrón de acople universal para péptidos presentados por las moléculas de histocompatibilidad HLA-II (DR, DP y DQ), siendo una base para el diseño de vacunas proteicas. Estos patrones espaciales fueron claramente exhibidos por los residuos altamente conservados de los tres tipos de moléculas de HLA-II. La aplicación de este nuevo hallazgo permitió diseñar péptidos con mejores valores de acople péptido-HLA-II, que los generados por el péptido de acople universal conocido como CLIP (class Il-associated invariant chain peptide).(AU)

Starting from the multiple alignment of human protein sequences obtained from the NCBI database (National Center of Biotechnology Information) and subsequent three-dimensional spatial analysis, the existence of a pattern of universal coupling to peptides presented by MHC molecules HLA-II (DR, DP and DQ) was established, being a basis for the design of protein vaccines. These spatial patterns were clearly exhibited by highly conserved residues of the three kinds of HLA-II molecules. The application of this new finding made it possible to design peptides with better Peptide -HLA-II coupling values than those generated by the universal coupling peptide called CLIP (class II-associated invariant chain peptide).(AU)

FA partir do alinhamento múltiplo de sequéncias de proteínas humanas obtidas a partir das bases de dados do NCBI (National Center of Biotechnology Information) e análise espacial tridimensional subsequente, estabeleceu-se a existéncia de um padráo de acoplamento universal para peptídeos apresentados pelas moléculas de histocompatibilidade HLA-II (DR, DP e DQ), sendo uma base para o desenho de vacinas proteicas. Estes padroes espaciais foram claramente exibidos pelos residuos altamente conservados dos trés tipos de moléculas de HLA-II. A aplicagáo deste novo achado permitiu desenhar peptídeos com melhores valores de acoplamento peptídeo-HLA-II, do que aqueles gerados pelo peptídeo de acoplamento universal conhecido como CLIP (classe II-peptídeo associado a cadeia invariante).(AU)